INSTALLATION |
Chippy Catcher is easy to install on site by the builder.
From the safety of the scaffold Chippy Catcher is draped over the top plates of the wall frames and the edges of the fabric are fastened to the top plate of the external walls. The overhanging fabric is fastened to the vertical edge of the top plate and the Truss Packer is installed over the Top Plate as usual. Once the Truss Packers on the exterior walls are installed, any overlapping joins in the Chippy Catcher are fastened, then any remaining interior Truss Packers are fastened down. Full instructions can be downloaded below. |
| chippy_catcher_instruction_sheet.pdf |
|
|
|
|
REMOVAL Once all risk of falling has passed, Chippy Catcher can be easily removed from below by running a sharp knife around the perimeter of every room. The larger off cuts are perfect for using on your next project! |
|